Workshop Repair Manuals

Chevrolet Workshop Manuals

[PREV PAGE] [NEXT PAGE]

chevrolet Workshop Repair Guides


Corvette V8-6.2L (2008)

Powertrain Management > Fuel Delivery and Air Induction > Fuel Pressure Release > System Information > Service and Repair > Fuel Pressure Gage Installation and Removal > Page 4874

Page 2
background image

Important:  If relieving the fuel pressure for the fuel pressure gage installation and removal, it is NOT necessary to proceed with the
following steps.

12. Disconnect the CH-48027-2 (2) from the CH-48027-3 (4).
13. Disconnect the CH-48027-3 (4) from the fuel rail service port. 
14. Remove the shop towel from around the fuel rail service port, and place in an approved gasoline container.
15. Install the fuel rail service port cap.
16. Install the engine cover, if required.
17. Tighten the fuel fill cap.

Powertrain Management > Fuel Delivery and Air Induction > Fuel Pressure Release > System Information > Service and Repair > Fuel Pressure Gage Installation and Removal > Page 4874

[PREV PAGE] [NEXT PAGE]