Corvette V8-6.2L (2008)
2. Connect the fuel fill pipe ground strap.
Tighten the fuel fill pipe ground strap bolt to 8 N.m (71 lb in).
3. Uncap the openings on the fuel fill hose (1) and the vent hose (2).
4. Connect the fuel fill hose (1) and the vent hose (2) to the fuel tank fill and vent pipe.
Tighten the fuel fill hose clamp to 4 N.m (35 lb in).
5. Install the left rear wheelhouse panel. Refer to Rear Wheelhouse Liner Panel Replacement (See: Body and Frame/Fender/Rear Fender/Rear
Fender Liner/Service and Repair) .
6. Install the fuel filler cap.
