Workshop Repair Manuals

Chevrolet Workshop Manuals

[PREV PAGE] [NEXT PAGE]

chevrolet Workshop Repair Guides


Corvette V8-6.2L (2008)

Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Diagrams > Diagram Information and Instructions > Page 2819

Page 20
background image

4. Insert the J 38125-561 tool into the 2 cavities on each side of the terminal at the front of the connector and push until you feel the tool disengage

the terminal retainers. See the release tool cross reference in the Reference Guide of the J-38125  to ensure that the correct release tool is used.

5. Carefully pull the terminal out of the connector. Always remember never use force when pulling a terminal out of a connector. If the terminal is

difficult to remove, repeat the entire procedure. 

Terminal Repair Procedure

Use the appropriate terminal and follow the instructions in the J-38125  .

Bosch Connectors (ECM)

Bosch Connectors (ECM)

Tools Required

J-38125 Terminal Repair Kit

Removal Procedure

1. Locate the assist lever on the top of the connector. Move the assist lever to the forward position.

Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Engine Control Module > Component Information > Diagrams > Diagram Information and Instructions > Page 2819

[PREV PAGE] [NEXT PAGE]