Corvette V8-6.2L (2008)
9. Depress the lock tab and release the cam (2) to disconnect the electrical connector from the EBCM (3).
10. Remove the 4 EBCM-to-BPMV retaining bolts.
11. Separate the EBCM (1) from the BPMV (2) by carefully pulling apart.
Installation Procedure
1. Clean the sealing surface of the BPMV with denatured alcohol, or equivalent, and a clean shop cloth.
2. Ensure the motor connector (3) is in place on the EBCM (1).
3. Install the EBCM to the BPMV. Use care when aligning the EBCM (1) to the BPMV electrical terminals (2).
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
4. Install the 4 EBCM-to-BPMV retaining bolts. Tighten the bolts in a criss-cross pattern.
Tighten the bolts to 5 N.m (44 lb in).
