Corvette V8-6.2L (2008)
Clutch Switch: Service and Repair
Clutch Pedal Cruise Control Release Switch Replacement
Removal Procedure
Caution: Refer to Battery Disconnect Caution (See: Starting and Charging/Battery/Service Precautions/Technician Safety Information/Battery
Disconnect Caution) .
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (6.0L) (See: Starting and
Charging/Battery/Battery Cable/Service and Repair)Battery Negative Cable Disconnection and Connection (7.0L) (See: Starting and
Charging/Battery/Battery Cable/Service and Repair) .
2. Remove the LH instrument panel (I/P) lower insulator panel. Refer to Instrument Panel Insulator Panel Replacement (See: Body and
Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair) .
3. Disconnect the clutch cruise control release switch electrical connector.
4. Remove the clutch cruise control release switch from the bracket.
Installation Procedure
1. Install the clutch cruise control release switch to the bracket.
2. Fully seat the switch to the bracket.
Audible clicks will be heard while pushing the switch.