Corvette V8-6.2L (2008)
1. Coat the threads of the bank 2, oxygen sensor 1 (3) with the anti-seize compound P/N 5613695, or the equivalent if necessary.
Notice: Refer to Fastener Notice .
2. Install the bank 2, oxygen sensor 1 (3), in the exhaust manifold.
Tighten the oxygen sensor to 41 N.m (30 lb ft).
3. Reconnect the bank 2, oxygen sensor 1 (3), electrical connector to the engine wiring harness electrical connector.
4. Lower the vehicle.
