Corvette V8-6.2L (2008)
7. Install the 2 TORX(R) head screws (1) to the lower trim cover.
Tighten the screws to 4 N.m (35 lb in).
8. Install the driver knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement (See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair) .
9. Install the tilt lever. Refer to Tilt Lever Replacement (See: Steering and Suspension/Steering/Steering Column/Service and Repair/Tilt Lever
Replacement) .
10. Enable the SIR system. Refer to SIR Disabling and Enabling (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air
Bag(s) Arming and Disarming/Service and Repair) .