Corvette V8-6.2L (2008)
8. Remove the battery positive/negative cable from the vehicle.
Installation Procedure
1. Position the battery positive/negative cable to the vehicle.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the positive battery cable (1) to the stud and install the positive battery cable to starter solenoid nut (2).
Tighten the positive battery cable to starter solenoid nut to 10 N.m (89 lb in).
3. Position the negative battery cable (4) and install the battery positive/negative cable to engine bolt.
Tighten the battery positive/negative cable to engine bolt to 40 N.m (30 lb ft).
4. Lower the vehicle.
