chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Body - Snapping/Popping Noise Door Or Lock Pillar|Page 11186 > < Body - Snapping/Popping Noise Door Or Lock Pillar|Page 11184
Page 3
background image

Tighten the door lock striker screws to 24 Nm (18 lb ft).

5. Install the large water deflector (1) to the rear of the door.
6. Install the door panel. Refer to Front Side Door Trim Panel Replacement - Left Side   (See: Front Door Panel/Service and Repair) or Front Side

Door Trim Panel Replacement - Right Side   (See: Front Door Panel/Service and Repair).

7. Verify the fit of the panels, and the operation of the door latch by using the manual and electric door release.

Body - Snapping/Popping Noise Door Or Lock Pillar|Page 11186 > < Body - Snapping/Popping Noise Door Or Lock Pillar|Page 11184