Corvette V8-6.2L SC (2009)
11. The DT-48009-2 - adapter upper gage block location (1) is used when servicing 2.56 ratio differentials. The lower gage block location (2) is used
when servicing the 3.42 ratio differentials.
12. Using a feeler gage, measure the distance between the rod of the DT-48009-3 - adapter (1) and the gage block of the DT-48009-2 - adapter (2).
Record the measurement as dimension C1.
13. Subtract C1 value from a C nominal value of 5 mm (0.197 in). Record that calculation as C2.
Refer to the applicable calculation table in Spacer and Shim Specifications (Base) (See: Specifications/Mechanical Specifications/Spacer and
Shim Specifications (Base))Spacer and Shim Specifications (Z06) (See: Specifications/Mechanical Specifications/Spacer and Shim
Specifications (Z06)).
