Corvette V8-7.0L (2007)
Ultrasonic Sensor: Service and Repair
Theft Deterrent Intrusion Sensor Replacement
Removal Procedure
1. Remove the windshield upper garnish molding.
2. Pull on the intrusion sensor to disengage the sensor from the windshield garnish molding.
3. Remove the intrusion sensor from the windshield garnish molding.
Installation Procedure
1. Install the intrusion sensor in to the windshield garnish molding.
2. Push on the sensor to engage the sensor into place.
3. Install the windshield upper garnish molding.
