Corvette V8-7.0L (2007)
Front Door Weatherstrip: Service and Repair
Door Weatherstrip Replacement
Door Weatherstrip Replacement
Removal Procedure
1. Remove the push-pin retainers from the ends of the weatherstrip.
2. Pull the weatherstrip from the full length of the door.
3. Remove any weatherstrip retainers that remain in the door. The new weatherstrip comes with retainers.
Installation Procedure
1. Starting at one end of the weatherstrip align the retainers on the weatherstrip with the holes in the door.
2. Press the retainers firmly into the holes in the door.
3. Insert and press the push-pin retainers through the weatherstrip molded ends into the door.
