Corvette V8-7.0L (2007)
7. Connect the electrical harness to the clips on the crossmember.
8. Connect the brake pipe to the clips on the crossmember.
9. Install the transverse spring with the J 33432-A connected, to the crossmember. Refer to Front Transverse Spring Replacement .
10. Install the engine oil line hose bracket to the crossmember.
Notice: The magnesium crossmember requires the use of unique lower control arm cam bolts, washers, and aluminum bushing ferrules. Failure to
use these specific components during assembly will result in severe corrosion damage.
11. Install the lower control arm to the crossmember. Refer to Lower Control Arm Replacement .