Corvette V8-7.0L (2007)
Caution: In order to avoid personal injury or vehicle damage when you repair or replace the carpet, use the same thickness and material size as
the original installation. Always return the carpet to the original location.
1. Position the carpet over the floor.
2. Install the carpet air outlet into the carpet to the passenger side only.
1. Rotate the air outlet 45 degrees counterclockwise and insert the outlet into the front of the carpet.
2. Rotate the air outlet 45 degrees clockwise to lock in position.
3. Connect the air duct to the carpet air outlet on the passenger side only.
4. Tuck the carpet under the accelerator pedal.
Notice: Refer to Fastener Notice in Cautions and Notices.
5. Install the accelerator pedal stop.
Tighten the stop nuts to 10 N.m (89 lb in).
