Corvette V8-7.0L (2007)
5. Pull the carpet back and disconnect the air duct from the passenger side only.
6. Pull the intermediate carpet from under lock pillar trim and reposition up out of the way.
7. Pull the carpet from under the instrument panel and accessory trim plate.
8. Pull the seat electrical connector down through the carpet, if equipped.
9. Remove the carpet.
10. Remove the carpet air outlet, if necessary, by turning the air outlet counterclockwise.
Installation Procedure
Caution: In order to avoid personal injury or vehicle damage when you repair or replace the carpet, use the same thickness and material size as
the original installation. Always return the carpet to the original location.
1. Position the carpet over the floor.
2. Install the carpet air outlet into the carpet to the passenger side only.
1. Rotate the air outlet 45 degrees counterclockwise and insert the outlet into the front of the carpet.
2. Rotate the air outlet 45 degrees clockwise to lock in position.
