Corvette V8-7.0L (2007)
Install a piece of 2 mm thick shim stock, 8 mm wide by 40 mm long (0.31 in by 1.6 in) to the A-pillar as illustrated.
Install a piece of flocking tape 8 mm wide by 40 mm long (0.31 in by 1.6 in) to the edge of the windshield garnish molding and wrap it around the back
side of the molding as shown in the illustration above.
Install the headliner. Refer to Headliner Trim Panel Replacement in SI.
Parts Information
Order BRS tape and shim stock from Kent Automotive at 1-888-Yes-Kent) or on the web at www.kent-automotive.com.
Warranty Information
