Corvette V8-7.0L (2007)
1. Position the trim panel within the vehicle.
2. Feed the seat belt through the opening in the panel.
3. Push inward on the panel until the retaining clips engage securing the panel to the vehicle.
4. Install the seat belt escutcheon (1) in the trim panel.
Notice: Refer to Fastener Notice .
5. Install the seat belt anchor bolt to the seat.
Tighten the bolt to 9 N.m (80 lb in).
6. Install the lift window strut. Refer to Rear Compartment Lift Window Strut Replacement .
Rear Roof Bow Trim Panel Replacement
Rear Roof Bow Trim Panel Replacement
Removal Procedure
1. Remove the roof lift off panel.
2. Remove the push-pins from the outer ends of the roof bow center trim panel.
3. Starting in the center of the roof bow center trim panel pull down on the trim panel separating the retaining clips and the hook and loop fastener
patches from the roof bow.
4. Remove the roof bow interior trim panel.
Installation Procedure
