Corvette V8-7.0L (2007)
Power Mirror Motor: Service and Repair
Outside Rear View Mirror Motor Replacement
Removal Procedure
1. Remove the door trim panel.
2. Disconnect the electrical connector to the mirror wire harness.
Caution: Refer to Eye Protection Caution in Cautions and Notices.
3. Remove the mirror face.
4. Remove the screws from the mirror motor.
5. Pull the motor electrical harness through the mirror housing.
6. Remove the motor from the mirror housing.
Installation Procedure
1. Position the motor to the mirror housing.
2. Pull the motor electrical harness through the mirror housing to the inside door panel.
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the screws to the mirror motor.
