Corvette V8-7.0L (2007)
Convertible Top Deck Lid: Service and Repair
Compartment Lid Extension - Folding Top Stowage
Compartment Lid Extension - Folding Top Stowage
Removal Procedure
1. Open the folding top stowage compartment lid.
2. Remove the screws attaching the lower sides of the extension panel.
3. Remove the screws attaching the top of the extension panel.
4. Remove the panel upward from the bracket.
Installation Procedure
1. Position the extension panel to the bracket with the latch manual release cable extending out from under the panel.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the bolts attaching the extension panel to the bracket.
Tighten the extension panel bolts to 4 N.m (35 lb in).
3. Closed the folding top stowage compartment lid.
Folding Top Stowage Compartment Lid Hinge Replacement
Folding Top Stowage Compartment Lid Hinge Replacement
Removal Procedure
Important: The stowage lid and the rear compartment lid will contact if they are opened at the same time. Be sure that one lid is latched at all
times.