Corvette V8-7.0L (2007)
11. Install the seat module, if equipped.
12. Install the lumbar pump and module, if equipped.
13. Install the memory module, if equipped.
14. Install the trim cover and pad to the seat cushion frame. Refer to LINK .
15. Install the side trim panel. Refer to LINK .
16. Install the inflatable restraint passenger presence system. Refer to Inflatable Restraint Passenger Presence System Replacement - Front .
17. Install the seat cushion cover and pad. Refer to LINK .
18. Install the pretensioner and seat belt buckle. Refer to Seat Belt Buckle Pretensioner Replacement .
19. Install the seat. Refer to Seat Replacement .
Caution: To avoid personal injuries, re-zero the passenger presence system whenever you remove or replace the seat cushion or trim. Failure to
do so may cause the system to malfunction.
20. Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is
removed. Refer to Passenger Presence System Programming and Setup .
