Corvette V8-7.0L (2007)
3. Using the appropriate tools, position the tools between the inner and outer brake pads so that when the compressed air is applied, the pistons will
not move.
Important: The following service procedure should be repeated until all pistons have been removed from the caliper.
4. Using the C-Clamp from the CH-47954, hold the brake pad opposite the piston to be removed from the caliper.
Caution: Refer to Safety Glasses and Compressed Air Caution.
5. Apply filtered, non-lubricated compressed air to the piston.
6. Remove the piston (1) from caliper.
7. After the inboard and outboard piston has been removed, move to the next piston and repeat the clamping procedure until all pistons have been
removed.
8. Using a long medium-bladed screwdriver, remove the dust seal (2) from the caliper body. Use caution as not to damage the caliper.
9. Using a small flat-bladed pocket screwdriver or equivalent, remove the piston seal (3).
