Corvette V8-7.0L (2007)
1. Apply high temperature, silicone lubricant to positions 1 and 2. Do not apply grease to the bolt threads (3).
2. Install the actuator to the dust shield.
3. Apply high temperature, silicone lubricant to the brake caliper bolt shaft. Do not lubricate the bolt threads.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the actuator mounting bolts.
Tighten the actuator mounting bolts to 70 N.m (52 lb ft)
5. Install the park brake shoe assembly by grasping the shoe and spreading slightly while pulling the shoe over the actuator assembly.
6. Install the park brake shoe retaining spring.
7. Adjust the park brake. Refer to Park Brake Adjustment.
8. Install the brake rotor.
