Corvette V8-7.0L (2007)
Vacuum Brake Booster: Service and Repair
Vacuum Brake Booster Replacement
Removal Procedure
Caution: Refer to Battery Disconnect Caution.
1. Disconnect the battery negative cable.
2. Remove the protective cap on the radiator surge tank upper stud.
3. Remove the radiator surge tank upper nut.
4. Loosen the radiator surge tank side nut.
Important: DO NOT remove the radiator surge tank inlet and outlet hoses.
5. Lift the radiator surge tank upward and position it forward.
6. Disconnect the electrical connector (1) from the brake fluid level sensor.
7. Remove the nuts securing the master cylinder to the brake booster.
