Corvette V8-7.0L (2007)
Coolant Reservoir: Service and Repair
Radiator Surge Tank Inlet Hose/Pipe Replacement
Surge Tank Hose/Pipe Replacement - Inlet
Tools Required
J 38185 Hose Clamp Pliers
Removal Procedure
1. Drain the cooling system. Refer to Draining and Filling Cooling System (GE 47716) Draining and Filling Cooling System (Static Fill).
2. Remove the radiator support.
3. Disengage tension and reposition the surge tank inlet hose clamp at the surge tank using the J 38185.
4. Disconnect the surge tank inlet hose from the surge tank.
5. Disengage tension and reposition the surge tank inlet hose clamp at the throttle body assembly using the J 38185.
6. Disconnect the surge tank inlet hose from the air bleed pipe assembly.
