Corvette V8-7.0L (2007)
2. Install the valve rocker arm cover (505).
3. Install the valve rocker arm cover bolts (516).
Notice: Refer to Fastener Notice.
4. Tighten the valve rocker cover bolts.
Tighten the valve rocker arm cover bolts to 12 N.m (106 lb in).
5. Install the ignition coil assembly.
6. Connect the generator electrical connector (1).
7. Install the engine wiring harness generator lead and nut (3).
Tighten the engine wiring harness generator lead nut to 13 N.m (115 lb in).
8. Install the left engine sight cover.