Corvette V8-7.0L (2007)
Oil Cooler: Service and Repair
Engine Oil Cooler Hose/Pipe Replacement (KPS)
Engine Oil Cooler Hose/Pipe Replacement (KPS)
Removal Procedure
1. Install oil drain pan under the vehicle.
2. Remove the engine oil cooler hose/pipe from the radiator.
3. Remove the engine oil cooler hose/pipe clip (3) from the fan shroud.
4. Remove the bolt (2) securing the engine oil cooler hose/pipe assembly to the engine block.
5. Remove the bolts (1) securing the engine oil cooler hose/pipe to the oil filter housing.
6. Remove the engine oil cooler hose/pipe assembly from the vehicle.
7. Remove and discard all engine oil cooler hose/pipe seals.
Installation Procedure
1. Install new engine oil cooler hose/pipe seals.
2. Install the engine oil cooler hose/pipe assembly to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the bolts (1) securing the engine oil cooler hose/pipe to the oil filter housing.
Tighten the bolts to 12 N.m (106 lb in).
