Corvette V8-7.0L (2007)
Oil Line: Service and Repair
Oil Tank Outlet Hose Replacement
Oil Tank Outlet Hose Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Drain the engine oil.
3. Remove the right front wheelhouse rear liner.
4. Remove the oil inlet/outlet hose bracket bolt.
Important: Anytime the oil tank inlet and outlet hoses are serviced, the oil seals must be replaced.
5. Remove the outlet hose to oil tank bolt (3) and disconnect the hose (2) from the oil tank. Discard the oil seal (1).
