Corvette V8-7.0L (2007)
Oil Reservoir: Service and Repair
Oil Tank Replacement
Removal Procedure
1. Remove the hood stop bracket to oil tank bolt.
Important: Prior to the disconnecting the PCV tubes from the oil tank, mark the port locations to the proper tubes or they can be
installed incorrectly.
2. Disconnect the positive crankcase ventilation (PCV) fresh air tube from the front port on the oil tank.
3. Disconnect the PCV dirty air tube from the rear port on the oil tank.
4. Remove the 2 oil tank middle bracket nuts.
5. Raise and support the vehicle. Refer to Vehicle Lifting.