Corvette V8-7.0L (2007)
7. Install the EVAP valve (730), bracket (741), and bolt (742).
Tighten the bolt to 50 N.m (37 lb ft).
8. Install the EVAP tubes (729, 735).
9. Install the fuel rail.
10. Reconnect the electrical connector for the MAP sensor.
11. Install the vacuum hose for the brake booster.
12. Reconnect the electrical connectors (3) throttle body.
13. Reconnect the electrical connector (1) for the fuel injectors.
14. Install the wiring harness clips to the fuel rail and reconnect the wiring harness.
15. Refill the cooling system. Refer to Draining and Filling Cooling System (GE 47716) Draining and Filling Cooling System (Static Fill).
16. Install the engine sight covers.
