Corvette V8-7.0L (2007)
Crankshaft Main Bearing Seal: Service and Repair
Crankshaft Rear Oil Seal Replacement
Tools Required
J 41479 Crankshaft Rear Oil Seal Installer
Removal Procedure
1. Remove the engine flywheel.
2. Gently pry the crankshaft rear oil seal (1) from the rear cover.
Installation Procedure
Important: For proper orientation, note the installation direction of the oil seal. The oil seal is a reverse-lip design. The part number is
applied to the outside face of the seal, as shown.
1. Inspect the seal and identify the part number markings for proper orientation.
