Corvette V8-7.0L (2007)
Blower Motor: Service and Repair
Blower Motor Replacement
Removal Procedure
1. Remove the right hand (RH) insulator panel.
Caution: Unplug the blower motor before removal. Blower motor case contact with any ground may start the fan and cause personal
injury.
Important: The blower motor resistor is internal to the blower motor assembly and is not serviced separately.
2. Disconnect the blower motor electrical connector.
3. Remove the blower motor retaining screws.
4. Remove the blower motor from the HVAC module.
Installation Procedure
