Corvette V8-7.0L (2007)
5. Remove the LH radiator air baffle upper retainer pin (1).
6. Raise and support the vehicle.
7. Remove the cap or tape from the front evaporator inlet line.
8. Install a new seal washer onto the front evaporator inlet line.
9. Connect the front evaporator inlet line to the A/C condenser.
Notice: Refer to Fastener Notice in Service Precautions.
10. Install the front evaporator inlet line bolt.
Tighten the bolt to 16 N.m (12 lb ft).
11. Lower the vehicle.
12. Remove the cap or tape from the A/C compressor hose assembly.
