Corvette V8-7.0L (2007)
Notice: Refer to Fastener Notice in Service Precautions.
7. Install the heater pipe assembly retaining bolt (1).
Tighten the bolt to 14 N.m (10 lb ft).
8. Remove cap or plug from the heater hoses.
9. Connect heater inlet and outlet hoses to the heater pipe assembly.
10. Install the heater hose clamps into position using the J 38185.
11. Install the rear evaporator line assembly.
12. Fill the cooling system. Refer to Draining and Filling Cooling System (GE 47716) Draining and Filling Cooling System (Static Fill) in Engine
Cooling.
