Corvette V8-7.0L (2007)
5. Connect the vent hose (2) to the EVAP vent valve.
6. For vehicles equipped with automatic transmission, install the right muffler.
7. Install the EVAP canister access cover.
8. Install the right rear wheelhouse panel.
9. Lower the vehicle.
Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine Purge Pipe
Evaporative Emission System Hoses/Pipes Replacement (Engine Purge Pipe)
Removal Procedure
Caution: Refer to Fuel and EVAP Pipe Caution in Service Precautions.
1. Remove the left engine sight cover.
