Corvette V8-7.0L (2007)
1. Apply a small amount of clean motor oil to the O-rings (8) and (9), before installing the new fuel injector.
2. Install the fuel injector (7) in the fuel rail (2).
3. Install the retaining clips for the fuel injector (6).
4. Reconnect the electrical connector (50 for the fuel injector (7).
5. Install the fuel rail assembly (2).
6. Inspect for leaks:
1. Turn the ignition switch ON for 2 seconds.
2. Turn the ignition switch OFF for 10 seconds.
3. Turn the ignition switch ON.
4. Inspect for fuel leaks.