Corvette V8-7.0L (2007)
1. Install the chassis fuel pipe (5) into the underbody retainers (6).
2. Install the driveline tunnel closeout panel.
3. Install the exhaust intermediate pipe.
4. Lower the vehicle.
5. Remove the cap from the engine compartment fuel feed pipe.
Notice: Refer to Fastener Notice.
6. Connect the chassis fuel and EVAP pipe retainer (1) at the upper front of dash mounting stud (3).
Tighten the fuel and EVAP pipe retainer nut to 6 N.m (53 lb in).
7. Connect the fuel feed hose (2) to the chassis fuel feed pipe (3).
8. Tighten the fuel filler cap.