Corvette V8-7.0L (2007)
5. Disconnect the chassis fuel and evaporative emission (EVAP) pipe retainer (1) from the upper front of dash mounting stud (3).
Caution: Refer to Vehicle Lifting Caution.
6. Raise the vehicle. Refer to Vehicle Lifting.
7. Remove the exhaust intermediate pipe.
8. Remove the driveline tunnel closeout panel.
9. Disconnect the chassis fuel pipe (5) from the underbody retainers (6).
10. Remove the chassis fuel pipe.
Installation Procedure
Important:
*
Follow the same routing as the original pipe.
*
Secure the pipe in order to prevent chafing.
*
Do not kink or bend the pipe.