Corvette V8-7.0L (2007)
Fuel Filler Hose: Service and Repair
Fuel Tank Crossover Tube/Hose Replacement
Fuel Tank Crossover Tube/Hose Replacement
Removal Procedure
1. Remove the driveline support assembly.
2. Remove the crossover tube from the clamp located above the transmission.
3. Disengage the left crossover tube connector position assurance (CPA) retainer by pulling the tab (1) outward and rotate.
Important: The crossover tube CPA is released when the latch disengages from the tank connection groove.
4. Rotate crossover tube collar counterclockwise to disengage.
5. Disconnect the crossover tube from the left fuel tank by pulling the tube straight out of the fuel tank connection.
6. Repeat steps 3 through 5 for the right side tank.
Installation Procedure