Corvette V8-7.0L (2007)
3. Remove the air cleaner assembly.
4. Disconnect the air control valve electrical connector.
5. Remove the throttle body attaching bolts.
Important: Do not reuse the throttle body gasket. Install a new gasket during assembly.
6. Remove the throttle body and the gasket.
7. Discard the throttle body gasket.
Installation Procedure
1. Install a new throttle body gasket.
2. Install the throttle body assembly.
Notice: Refer to the Fastener Notice.
Important: Always use a torque wrench in order to obtain the proper torque.
3. Install the throttle body attaching bolts.
Tighten the throttle body bolts to 10 N.m (89 lb in).