Corvette V8-7.0L (2007)
2. Install the ignition coil mounting bolts.
Tighten the ignition coil mounting bolts to 12 N.m (106 lb in).
3. Connect the spark plug wire at the ignition coil.
4. Connect the ignition coil harness connector.
Tighten the harness bolt to 12 N.m (106 lb in).
5. Install the engine sight shield, left side shown.
6. Connect the negative battery cable.
7. Program the transmitters. Refer to Transmitter Programming (Domestic and Japan) Transmitter Programming (Export - Including Canada). See:
Testing and Inspection/Programming and Relearning
