chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Seat Belt Buckle Switch > < Inflatable Restraint Front End Sensor Replacement|Page 2813
Page 2
background image

1. Install the sensor to the vehicle.

Notice:  Refer to Fastener Notice.

2. Install the retaining bolts to the inflatable restraint side impact sensor.

Tighten the bolts to 9 N.m (80 lb in).

3. Install the front side door trim panel.
4. Enable the SIR system. Refer to SIR Disabling and Enabling.

Seat Belt Buckle Switch > < Inflatable Restraint Front End Sensor Replacement|Page 2813