Corvette V8-7.0L (2007)
5. Remove the battery positive/negative cable bolt (3) from the engine block.
6. Remove the battery positive/negative cable nut (2) from the starter solenoid.
7. Remove the battery positive/negative cable from the vehicle.
Installation Procedure
1. Position the battery positive/negative cable into the vehicle.
Notice: Refer to Fastener Notice.
2. Install the battery positive/negative cable nut (2) to the starter solenoid.
Tighten the battery positive/negative cable nut to 10 N.m (89 lb in).
3. Install the battery positive/negative cable bolt (3) to the engine block.
Tighten the battery positive/negative cable to engine block bolt to 40 N.m (30 lb ft).
