Corvette V8-7.0L (2007)
Starter Motor: Service and Repair
Starter Motor Replacement
Removal Procedure
Caution: Refer to Battery Disconnect Caution.
1. Disconnect the negative battery cable.
2. Remove the right catalytic converter.
3. Remove the positive battery cable nut.
4. Remove the positive battery cable terminal and the engine harness leads from the solenoid.
5. Remove the S terminal nut (2).
6. Remove the purple wire lead (1) and washer from the solenoid.
7. Support the starter motor.
8. Remove the starter motor bolts.
9. Remove the starter motor.
Installation Procedure
1. Position the starter motor to the block.
Notice: Refer to Fastener Notice.