Corvette V8-7.0L (2007)
Steering Control Module: Service and Repair
Steering Column Lock Control Module Replacement
Removal Procedure
Caution: Refer to Restraint System Service Precautions.
1. Disable the SIR system.
Notice: Avoid damaging the steering column electronic lock harness by gently removing the plugs installed in the I/P beam. Do NOT twist, pull,
bend, cut, or incorrectly route the harness. Damage to the harness will require replacement of the entire electronic lock.
2. Remove the I/P Assembly.
3. Disconnect the electrical connectors at the lock module.
4. Remove the lock module by pulling the module up to release the retaining clips and sliding the module upward.
Installation Procedure