Corvette V8-7.0L (2007)
6. Install the front transverse spring.
7. Remove the spring compressor tool J 33432-A.
8. Connect the shock absorber to the lower control arm.
Tighten the shock absorber lower mounting nuts to 28 N.m (21 lb ft).
9. Connect the ESC electrical connector to the shock, if equipped.
10. Connect the electrical connector to the wheel speed sensor.
11. Remove the jackstands.
12. Install the tire and wheel assembly.
13. Lower the vehicle.
14. Perform a front wheel alignment. Refer to Measuring Wheel Alignment.
Tighten the lower control arm cam bolt nuts to 170 N.m (125 lb ft).
