Corvette V8-7.0L (2007)
Tighten the shock absorber upper mounting nut to 26 N.m (19 lb ft).
4. Install the shock absorber lower mounting bolts and nuts.
Tighten the shock absorber lower mounting nuts to 28 N.m (21 lb ft).
5. Connect the electronic suspension control electrical connector to the shock, if equipped.
6. Remove J 33432-A from the spring.
7. Install the tire and wheel assembly.
8. Lower the vehicle.
9. For vehicles equipped with heavy duty shocks (FE3) perform the following steps.
1. Install the J 43822 to the shock absorber.
2. Install the shock absorber into the vehicle.
3. Install the upper insulator, retainer, and nut.
Tighten the shock absorber upper mounting nut to 26 N.m (19 lb ft).
4. Remove J 43822 from the shock absorber.
5. Install J 33432-A to the spring and compress.
6. Raise the lower control arm and install the shock absorber lower mounting bolts and nuts.
Tighten the shock absorber lower mounting nuts to 28 N.m (21 lb ft).
7. Remove J 33432-A from the spring.
8. Install the tire and wheel assembly.
9. Lower the vehicle.