Corvette V8-7.0L (2007)
Shift Interlock: Scan Tool Testing and Procedures
Scan Tool Data List
Scan Tool Data List
Remote Control Door Lock Receiver (RCDLR)
Transmission Control Module (TCM)
Scan Tool Data Definitions
Scan Tool Data Definitions
Remote Control Door Lock Receiver (RCDLR)
Battery Voltage
-
Display indicates battery voltage. Measured in volts.
Shift Lock Solenoid Command
-
The scan tool displays the commanded state of the solenoid when the brake pedal is applied or released the scan tool displays LOCK / UNLOCK
Shift Lock Solenoid State
-
The scan tool displays LOCK / UNLOCK the actual feedback state of the shift lock solenoid monitored by the RCDLR.
Transmission Control Module (TCM)
TCC Brake Switch
-
Displays ON or OFF status of the TCC Brake switch.
IMS A/B/C/P
-
Displays PARK / NEUTRAL / INVALID / REVERSE / DRIVE or LOW or HI for the state of each of the four inputs from the IMS. LOW
displayed indicates a low voltage signal (0 volts) being monitored at the TCM. HI displayed indicates a high voltage signal (B+) being monitored
at the TCM.
