Corvette V8-7.0L (2007)
Shifter A/T: Service and Repair
Automatic Transmission Control Replacement
Automatic Transmission Control Replacement
Removal Procedure
1. Place the vehicle on a level surface.
2. Block the wheels to keep the vehicle from moving.
3. Apply the parking brake.
4. Shift the floor shift control into PARK.
5. Turn the ignition to OFF and remove the ignition key.
Caution: Refer to Battery Disconnect Caution.
6. Disconnect the negative battery cable.
7. Remove the console.
8. Remove the instrument panel (I/P) accessory trim plate.
9. Disconnect the floor shift control electrical connector.
10. Disconnect the I/P wiring harness retaining clip from the shift control and reposition the harness.
11. Using a small flat-bladed screwdriver or other suitable tool, release the tab retaining the park/lock cable to the slot on the shift control.
12. Lift the park/lock cable out of the shift control slot and reposition the cable.
13. Grasp the cable end and pull rearward in order to unlock the cable from the shifter pivot arm stud, then reposition the cable.