Corvette V8-7.0L (2007)
1. Install the clutch actuator cylinder into position on the driveline support assembly.
Notice: Refer to Fastener Notice.
2. Install the actuator cylinder mounting bolts.
Tighten the bolts to 12 N.m (106 lb in).
3. Install the clutch hose connection retaining clip (1).
Important: DO NOT rely on an audible click or a visual verification of the clutch hydraulic hose quick connect fitting connection.
4. Connect the clutch hose (2) to the clutch actuator cylinder.
Firmly push the clutch hydraulic hose to the clutch actuator cylinder, then pull back on the fittings to verify engagement.
5. Install the driveline support assembly and transaxle to the vehicle.
