Corvette V8-7.0L (2007)
11. The DT-48009-2 center gage block location (1) is used when servicing 3.42 Z06 ratio differentials.
12. Using a feeler gage, measure the distance between the rod of the DT-48009-3 (1) and the gage block of the DT-48009-2 (2). Record the
measurement as dimension C1.
13. Subtract C1 value from a C nominal value of 3 mm (0.118 in). Record that calculation as C2.
Refer to the applicable calculation table in Spacer and Shim Specifications (Base) Spacer and Shim Specifications (Z06).